Clear Acrylic Sheet for Wholesale Supply
High-transparency PMMA sheet for signage, displays, glazing and transparent project components, available through cast and extruded production routes. Full sheets only — OLFA does not provide cutting or fabrication services.
Up to 92%
Typical light transmission, ASTM D1003
OLFA 000
Clear color reference
4 sizes
Regular full-sheet formats
0.8-50 mm
Combined coverage across extruded and cast routes
4 formats
1220 × 1830 to 2050 × 3050 mm
Up to 92%
Typical light transmission, ASTM D1003
45 sheets
Per size and thickness; total order from 3 metric tons
What is clear acrylic sheet?
Clear acrylic sheet is a transparent PMMA panel used where visibility, light transmission and a glass-like appearance are required. OLFA clear acrylic is identified by color reference 000 and supplied with a double-sided glossy surface as standard. It can be produced by cast or extruded manufacturing routes; the suitable route depends on thickness, order volume, dimensional consistency and downstream processing.
Clarity specified for real project decisions
Define the transparent appearance first, then confirm the production route that matches the project.
ASTM D1003
Up to 92% typical light transmission under ASTM D1003 supports clear viewing and consistent presentation.
000
OLFA 000 identifies the standard clear appearance, with a double-sided glossy surface by default.
2
Clear acrylic range and shared performance data
Values come from the shared OLFA Acrylic Data Sheet unless a process-specific statement is shown.
Product range
| Product reference | OLFA® Clear Acrylic Sheet, color code 000 |
|---|---|
| Surface | Double-sided glossy as standard |
| Production routes | Cast acrylic and extruded acrylic |
| Thickness | Cast: 1.8-50 mm Extruded: 0.8-12 mm |
| Regular sizes | 1220 × 1830, 1220 × 2440, 1560 × 3050 and 2050 × 3050 mm |
| Raw material | 100% virgin Mitsubishi MMA raw material Supplier declaration pending final confirmation. |
| Supply format | Full sheets only; OLFA does not provide cutting or fabrication services |
Typical properties
| Light transmission | Up to 92% typical, ASTM D1003 |
|---|---|
| Haze | Confirm by product-specific test report and order specification |
| Refractive index | 1.49, ASTM D542 |
| Specific gravity | 1.19, ASTM D792; commercial calculation uses 1.2 g/cm³ |
| Heat distortion | 100°C, ASTM D648 |
| Notched Izod impact | 2.0 kg·cm/cm, ASTM D256 |
| Rockwell hardness | M-100, ASTM D785 |
| Water absorption | 0.3% / 24 h, ASTM D570 |
| Flammability | UL HB, reference E320835 |
Data boundary: Published values are typical references, not automatic acceptance limits. Final performance, haze, tolerance and suitability must be confirmed against the selected route, thickness, grade and order specification. See the Cast Acrylic Sheet specification or Extruded Acrylic Sheet specification for process-specific details.
One clear appearance, two ways to specify it
This is a route summary. Use the technical comparison when machining, thickness control or forming behavior drives the decision.
Cast clear acrylic
For thicker sheets, demanding machining and a broader path to application-specific grades.
- 1.8-50 mm thickness range
- Strong downstream machining flexibility
- Thickness tolerance graded by nominal thickness
Extruded clear acrylic
For thin-gauge, repeat-volume programs where highly consistent thickness and economic supply are priorities.
- 0.8-12 mm thickness range
- Continuous repeat-volume production
- Highly consistent gauge in routine supply
Where transparent appearance supports the project
Confirm grade, loading, outdoor exposure, impact and local building requirements for the actual use.
Signage panels
Clear faces and protective panels where graphics must remain visible.
Display covers
Transparent housings that protect products without blocking the view.
Retail fixtures
Shelves and risers requiring a clean, visually light material.
Transparent partitions
Interior screens where visual connection and light passage matter.
Architectural daylighting
Transparent project panels, subject to structural and code confirmation.
Protective covers
Equipment covers specified according to impact and environmental needs.
Specify the sheet; plan fabrication separately
Clear acrylic can be cut, drilled, routed, polished, bonded and thermoformed by a qualified fabricator. OLFA supplies full sheets and does not offer cutting or fabrication services.
Plan specifications, volume and samples
Send route, thickness, full-sheet size, quantity, application and destination for an accurate quotation.
Minimum order
45 sheets + 3 t
45 sheets per size and thickness; combined order from 3 metric tons. Mixed specifications are subject to confirmation. Full sheets only. OLFA does not provide cutting or fabrication services.
Regular lead time
7-15 days
After deposit and color or sample confirmation for regular sizes and colors. Transit time is excluded.
Sample policy
1-2 days
Free A4 samples and color cards for qualified requests. The customer pays courier charges.